Divide Command in AutoCAD

The Divide command in AutoCAD is used to divide an object (such as a line, polyline, arc, or circle) into a specified number of equal segments. This command places point objects at the division points along the selected object. The Divide command is helpful when you need to mark specific intervals or divide a path into equal parts for measurements or construction purposes.

How to Use the Divide Command

Follow these steps to divide an object using the Divide command:

Step 1: Activate the Divide Command

To start the Divide command, you can:

  • Type DIVIDE in the command line and press Enter.
  • Click the Divide icon from the Modify panel or ribbon (if available).

Step 2: Select the Object to Divide

After activating the Divide command, AutoCAD will prompt you to select the object you wish to divide. You can:

  • Click on the object (line, polyline, arc, or circle) that you want to divide.

Step 3: Specify the Number of Divisions

After selecting the object, AutoCAD will ask you to specify the number of equal segments or divisions. You can:

  • Type the number of divisions you want (e.g., 5 for five equal segments) and press Enter.

Step 4: Complete the Divide Command

AutoCAD will place point objects at the division points along the selected object. These points will mark the equal intervals. To complete the command:

  • Press Enter or Esc to finish the command.

Applications of the Divide Command

The Divide command is particularly useful in the following scenarios:

  • Marking regular intervals along a line or path for layout purposes (e.g., for fence posts or road markers).
  • Creating divisions for measurement, where precise division points are needed for construction or drafting.
  • Defining equal sections along curved objects like arcs or circles for pattern creation or detail placement.

Conclusion

The Divide command in AutoCAD is a simple but powerful tool for dividing objects into equal segments. It is commonly used to create intervals, mark reference points, or for layout and design purposes. The points placed along the object can be used for further operations, such as placing objects, measuring distances, or aligning features.




Advertisement